Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

List of currently known data sources.

 

LocationSourceDescription
Historical
Date RangeCuratorExternal SourceStatusLinksIssues
HOBO
Big Ditch, Camp Creek, Goose Creek, Goose Creek at Bucks Pond, Saybrook, WildcatHOBO

An additional stream was created for Goose Creek at Bucks Pond and Saybrook. These two locations have air sensors and water sensors, and a calculation is performed from these two measurements that determines the water elevation.

 
04/22/2014 - 07/6/2015

Tim and Brynne from ISWS

Mingjing Yu?

No(tick) Ingestedhttp://imlczo.ncsa.illinois.edu/
...Not all parameters are necessary to show in the geodashboard
  1. Height to bridge, vertical distance from the water to the bridge, water density, etc.
clowder/collection/5500f98ce4b0feb5ae1545e7

 

 

  • Could only find data from 2014 in Clowder (see link)
  • Geodashoard shows data till summer 2015. Where is Summer 2016?


Clear Creek
 
Eddy Flux TowerClear Creek 1-1, 2-1 Christopher Wilson No(error) Have location, need dataSee attached spreadsheetThere are two sites that light up for CCW-Z2-S1-EF1.  The other one should be CCW-Z1-S1-EF1. 
Questions regarding raw data vs processed data.  This is more for clowder..
Clear CreekSoil gas AnalyzerClear Creek 1-1, 1-2, 2-1, 3-1  
(question)
Christopher WilsonNo(error) Have location, need dataSee attached spreadsheet

Part of ER experiments, still being processed for publication.

How will you represent the baseline sampling or this experimental data which are more point measurements vs. time series

 

Clear CreekRainfall SimulatorsClear Creek 1-1, 2-1 
(question)
Christopher WilsonNo(error) Have location, need data 

Part of ER experiments, still being processed for publication.

How will you represent the baseline sampling or this experimental data which are more point measurements vs. time series
Clear Creek

Water Content Reflectrometer

Clear Creek 1-1, 2-1 
(question)
Christopher WilsonNo(error) Have location, need data 

Part of ER experiments, still being processed for publication.

How will you represent the baseline sampling or this experimental data which are more point measurements vs. time series

H

USRBUSGS Water Quality

Historical data ingested by Ye Fan. Not currently being updated.

 

2/2014-5/2014
Ye Fan
NobodyYes(tick) Ingested 
 
Only on dashboard under USGS
Clear CreekIFC River SensorsCLRCRK01, CLRCRK03, CLRCRKS01, CLRCRKS02, CLRCRKW01
 
03/23/2014 - 10/13/2014Nobody
(question)
Yes(tick) Ingestedhttp://ifis.iowafloodcenter.org/ifis/en/ 
Sangamon Forest Preserve
site

Decagon

Manual upload

Latitude:  40.281513°
Longitude: -88.355564° (approximate, from Google Earth)
Parameters: Rainfall (mm),
Relative Humidity,
Solar Radiation (w/m2),
windspeed (m/s),
wind direction (degrees),
Air temperature (deg C),
Leaf wetness (1=wet/2=not wet). 
All parameters recorded at 1 minute interval.
 Allison GoodwellNo(tick) Ingested
 
  • The data is only present in the explore by parameter section of the Geodashboard
  • Several of the parameters make no sense
    1. Counts, valid, ts2 soil temp, etc.
  • http://imlczo.ncsa.illinois.edu/clowder/spaces/572a0c83e4b0ed483bd5e41d

    http://imlczo-dev.ncsa.illinois.edu/geodashboard/#detail/location/SRFP

     

  • Several of the variables are named with units in the title of the parameter
    1. mps, mm, minutes, etc.
  • The data is presented in a weird format
  • is it summed everyday, every hour?
  • Need to pick a format that is meaningful

    1. It is taking forever for the data to load
    2. Need to upgrade production to add it there
    3. Manually uploaded
    USRBFlux Tower

    Latitude: 40.15569444°

    Longitude: -88.55511111°

    Parameters: 25m tower. Instruments located at 3 heights: 25m, 10m, ground level. Infrared Temperature, Heat Flux, NDVI, PRI, Soil moisture/EC/Soil Temp, Wind speed, Photon Flux, CO2/H2O Flux, Radiation Flux

     
    Josh Peschel

    Steve Sargent

    Allison Goodwell

    Susana Roque

    No

    (tick) Have Installation

    (error) Need datalogger installation

     

    (tick) Data Logger Installed

    http://imlczo-dev.ncsa.illinois.edu/clowder/spaces/570e7d67e4b0ed483bd2da27

    http://imlczo.ncsa.illinois.edu/clowder/spaces/570e7d67e4b0ed483bd2da27

    Example geodashboard location (one of many):

    http://imlczo-dev.ncsa.illinois.edu/geodashboard/#detail/location/5TE Soil Probe 200cm/

    (tick) Data is being uploaded to the IMLCZO server and then uploaded to Clowder.

    (error) Datapoints Parser is in progress.

     
    Data is not sending from the Campbell
    Allerton Trust Farm

    Latitude:40.025611°

    Longitude: -88.661167° (approximate from Google Earth)

    Parameters: This site is equipped with an ISCO to collect data from tile drains. Soil Moisture/Soil Temp/Soil EC, Water EC/Water Temp/Water Depth, Wind speed, Precipitation, Air Temp/Vapor Pressure/Relative Humidity, ISCO

     
    Don Keefer/Derek Wagner/

    Dongkook Woo

    Qina Yan

    No

    (tick)Installation occurred

     

    (error) Need data

    Decagon Datalogger : http://www.ech2o.com/ 
    Username: 5G0F5179
    Password: shwai-regi
    Campbell Datalogger:
    Still in process of installation
  • Need to digest Decagon EM50G data
  • Installed

    (tick) Campbell Scientific data is being uploaded to IMLCZO server and then uploaded to Clowder.

    (error) Campbell Scientific Datapoints Parser is in progress.

    (error) Decagon has provided access to the API and Brock is working on the uploader to Clowder. Questions still remain regarding the precision Decagon uses when converting the raw data. Waiting to hear back from them before creating datapoints.

     
    Need to connect Modem to collect Campbell data
    Ameriflux Bondville

    Historical data from Aug-1996 - 12/31/2008.

     

    1996-2008Brock AngeloYes(tick) Ingested

    Ameriflux Bondville Data

    1. The data is not located flux tower according
     Illinois State Water Survey (ISWS)Several historical sensors ingested. As of 2015, only ISWS105 at Mahomet and ISWS134 at Saybrook are being updated. These are added to a Samba share and are parsed hourly and added to the API. 

    Erin Bauer  

    ebauer@illinois.edu

    No(tick) Ingested  
     Illinois State Water Survey (ISWS)

    Three locations of suspended sediment concentration collection through an ISCO

    Saybrook (40.437162°, -88.554961°)

    Mahomet (40.171096°, -88.446063°) 

    Monticello (40.030936°, -88.588422°)

    All three locations use a 6712 Teledyne ISCO to collect samples. Also included are:

    Saybrook- CR850 datalogger, CS451 pressure transducer

    Mahomet- CR10X datalogger, CS475 water level indicator

    Monticello- 1640 liquid level actuator

     Laura Keefer, Bruce RhoadsNo

    (error) Have Location,

    Need Data

      
     Illinois State Geological Survey (ISGS)

    The fiber-optic distributed temperature sensing (FO-DTS) team at the ISGS is equipped with: 

    1. SensorNet Oryx+ Distributed Temperature Sensing (DTS) system [Travel in Truck]

    2. Fujikura FS70 Fusion Splicer [Travel in Truck]

    3. Brugg BRUsens Temperature 4-fiber cable: 1100m for in situ measurement [Travel in Truck]

    4. MULTILINK AT-RK28T7X-004 2-fiber cable: 2500m for ditch bed deployment at flux tower site in 2015-2016 (40.15569444°, -88.55511111°)

    5. AFL DNS-0763 Flat Drop 2-fiber cable: 104m for 40m well in Rantoul site (40.282582°, -88.193135°)

    6. AFL DNS-0763 Flat Drop 2-fiber cable: 171m for 100m borehole in Rantoul site  (40.282582°, -88.193135°)

    7. AFL DNS-0763 Flat Drop 2-fiber cable: 1100m for in situ measurement [Travel in Truck]

     8. AFL DNS-0763 Flat Drop 2-fiber cable: 325m experimental configuration for future deployment 

     

    8

     9. One 240 volt and 2,000 watt cartridge heater with 100m cable is under construction at the ISGS for future heat tracer tests such fracture detection and groundwater/surface water interaction.

     Yu-Feng LinNo

    (error) Have Location,

    Need Data

     
    jjjjjjjjjjjjjjjjjjjoprfdjohfuvbvtbvtbvbtyvbtybvytyvyt
     

    There are other data missing like our wells, weathering array and water quality sondes.

    Are the pins sensors or sites? We entered more sensors in the past

    I don't follow the Clear Creek catchment layer.

    The CCW church sites looks off

    Questions regarding raw data vs processed data.  This is more for clowder..

    How will you represent the baseline sampling or this experimental data which are more point measurements vs. time series

    Image Added

    here is all the current sites and their data information