Note:  Sample Seabird data from Lake Erie Summer 2011 is attached to this page, click on the paperclip in the left corner to access it.

Software used to get data form sensor: http://www.taltech.com/products/winwedge/

Software used for data processing: http://www.seabird.com/software/sbedataproc-seasaverev.htm

Raw data format from sensor should be HEX (confirm)

Sea Bird - Collected Data 

Note:  The data was classified into three sections based on late SU12 conversations with Paris: 

Interesting Seabird data parts

  • # name 0 = depFM: Depth [fresh water, m]
  • # name 1 = t090C: Temperature [ITS-90, deg C]
  • # name 2 = c0mS/cm: Conductivity [mS/cm]
  • # name 3 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
  • # name 11 = flSP: Fluorescence, Seapoint
  • # name 4 = par: PAR/Irradiance, Biospherical/Licor

Other available seabird data types to being discussed in future

  • # name 4 = par: PAR/Irradiance, Biospherical/Licor
  • # name 5 = ph: pH
  • # name 6 = altM: Altimeter [m]
  • # name 7 = bat: Beam Attenuation, Chelsea/Seatech/WET Labs CStar [1/m]
  • # name 8 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]
  • # name 9 = prDE: Pressure, Digiquartz [psi]
  • # name 10 = ptempC: Pressure Temperature [deg C]
  • # name 11 = flSP: Fluorescence, Seapoint
  • # name 12 = specc: Specific Conductance [uS/cm]
  • # name 13 = spar: SPAR/Surface Irradiance
  • # name 14 = upoly0: Upoly 0, DO, mg/L Optode 4330FA
  • # name 15 = upoly1: Upoly 1, Temp, C Optode 4330FA
  • # name 16 = flag:  0.000e+00

Seabird parameters that have been identified as messy & error prone

  • # name 7 = bat: Beam Attenuation, Chelsea/Seatech/WET Labs CStar [1/m]
  • # name 8 = xmiss: Beam Transmission, Chelsea/Seatech/WET Labs CStar [%]

 

Derived Data Products

Thermocline Identification

Deep Chlorophyll Layer and Maximum (DCM)

Photic Zone

Hypoxia Layer