Next Generation of pyClowder
Build: #2 failed Changes by Marcus Slavenas
Test results
- 37 tests in total
- 15 tests failed
- < 1 second taken in total.
| Status | Test | Failing since | View job | Duration | |
|---|---|---|---|---|---|
|
test_datapoints
test_datapoints_count_by_sensor_get
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
test setup failure file /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_datapoints.py, line 5 def test_datapoints_count_by_sensor_get(caplog, host, key): E fixture 'caplog' not found > available fixtures: cache, capfd, capsys, doctest_namespace, host, key, monkeypatch, password, pytestconfig, record_xml_property, recwarn, tmpdir, tmpdir_factory, username > use 'pytest --fixtures [testpath]' for help on them. /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_datapoints.py:5 |
|||||
|
test_geostreams
test_version
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
test setup failure file /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_geostreams.py, line 7 def test_version(caplog, host, key): E fixture 'caplog' not found > available fixtures: cache, capfd, capsys, doctest_namespace, host, key, monkeypatch, password, pytestconfig, record_xml_property, recwarn, tmpdir, tmpdir_factory, username > use 'pytest --fixtures [testpath]' for help on them. /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_geostreams.py:7 |
|||||
|
test_geostreams
test_get_sensors
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
test setup failure file /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_geostreams.py, line 15 def test_get_sensors(caplog, host, key): E fixture 'caplog' not found > available fixtures: cache, capfd, capsys, doctest_namespace, host, key, monkeypatch, password, pytestconfig, record_xml_property, recwarn, tmpdir, tmpdir_factory, username > use 'pytest --fixtures [testpath]' for help on them. /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_geostreams.py:15 |
|||||
|
test_geostreams
test_raise_for_status
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
test setup failure file /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_geostreams.py, line 24 def test_raise_for_status(caplog, host, key): E fixture 'caplog' not found > available fixtures: cache, capfd, capsys, doctest_namespace, host, key, monkeypatch, password, pytestconfig, record_xml_property, recwarn, tmpdir, tmpdir_factory, username > use 'pytest --fixtures [testpath]' for help on them. /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_geostreams.py:24 |
|||||
|
test_sensors
test_sensors_post
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
test setup failure file /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_sensors.py, line 7 def test_sensors_post(caplog, host, key): E fixture 'caplog' not found > available fixtures: cache, capfd, capsys, doctest_namespace, host, key, monkeypatch, password, pytestconfig, record_xml_property, recwarn, tmpdir, tmpdir_factory, username > use 'pytest --fixtures [testpath]' for help on them. /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_sensors.py:7 |
|||||
|
test_sensors
test_sensors_delete
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
test setup failure file /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_sensors.py, line 29 def test_sensors_delete(caplog, host, key): E fixture 'caplog' not found > available fixtures: cache, capfd, capsys, doctest_namespace, host, key, monkeypatch, password, pytestconfig, record_xml_property, recwarn, tmpdir, tmpdir_factory, username > use 'pytest --fixtures [testpath]' for help on them. /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_sensors.py:29 |
|||||
|
test_sensors
test_sensors_get
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
test setup failure file /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_sensors.py, line 19 def test_sensors_get(caplog, host, key): E fixture 'caplog' not found > available fixtures: cache, capfd, capsys, doctest_namespace, host, key, monkeypatch, password, pytestconfig, record_xml_property, recwarn, tmpdir, tmpdir_factory, username > use 'pytest --fixtures [testpath]' for help on them. /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_sensors.py:19 |
|||||
|
unnamed test suite
tests.test_datapoints
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_datapoints.py:11:39: W292 no newline at end of file assert response.status_code != 200 ^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/test_datapoints.py:11:39: W292 no newline at end of file
assert response.status_code != 200
^
|
|||||
|
unnamed test suite
tests.conftest
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/conftest.py:14:1: E302 expected 2 blank lines, found 1 @pytest.fixture(scope="module") ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/tests/conftest.py:14:1: E302 expected 2 blank lines, found 1 @pytest.fixture(scope="module") ^ |
|||||
|
unnamed test suite
pyclowder.client
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/client.py:145:121: E501 line too long (137 > 120 characters) return requests.post(url, params=params, data=json.dumps(content), headers=self.headers, auth=(self.username, self.password)) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/client.py:163:121: E501 line too long (127 > 120 characters) return requests.post(url, params=params, files={"File": open(filename, 'rb')}, auth=(self.username, self.password)) ^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/client.py:145:121: E501 line too long (137 > 120 characters)
return requests.post(url, params=params, data=json.dumps(content), headers=self.headers, auth=(self.username, self.password))
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/client.py:163:121: E501 line too long (127 > 120 characters)
return requests.post(url, params=params, files={"File": open(filename, 'rb')}, auth=(self.username, self.password))
^
|
|||||
|
unnamed test suite
pyclowder.geostreams.time_transformers
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/time_transformers.py:2:30: E231 missing whitespace after ',' from datetime import datetime,timedelta ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/time_transformers.py:14:1: E302 expected 2 blank lines, found 1 def julian_day_to_month_day(year,julian_day): ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/time_transformers.py:14:33: E231 missing whitespace after ',' def julian_day_to_month_day(year,julian_day): ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/time_transformers.py:17:16: W292 no newline at end of file return date ^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/time_transformers.py:2:30: E231 missing whitespace after ','
from datetime import datetime,timedelta
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/time_transformers.py:14:1: E302 expected 2 blank lines, found 1
def julian_day_to_month_day(year,julian_day):
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/time_transformers.py:14:33: E231 missing whitespace after ','
(5 more lines...)
|
|||||
|
unnamed test suite
pyclowder.geostreams.geocode-convert
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:5:1: E302 expected 2 blank lines, found 1 def dms2dec(dms): ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:33: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:35: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:53: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:55: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:73: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:75: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:104: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:106: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:121: E501 line too long (157 > 120 characters) dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:124: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:126: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:144: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:146: E251 unexpected spaces around keyword / parameter equals dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:10:15: W292 no newline at end of file return dec ^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:5:1: E302 expected 2 blank lines, found 1
def dms2dec(dms):
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:33: E251 unexpected spaces around keyword / parameter equals
dec = LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2]))
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode-convert.py:8:35: E251 unexpected spaces around keyword / parameter equals
(38 more lines...)
|
|||||
|
unnamed test suite
pyclowder.geostreams.datapoints
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/datapoints.py:74:121: E501 line too long (181 > 120 characters) def datapoint_create_json(self, start_time, end_time, longitude, latitude, sensor_id, stream_id, sensor_name, properties, owner=None, source=None, procedures=None, elevation=0): ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/datapoints.py:103:9: E303 too many blank lines (2) datapoint['properties'] = properties ^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/datapoints.py:74:121: E501 line too long (181 > 120 characters)
def datapoint_create_json(self, start_time, end_time, longitude, latitude, sensor_id, stream_id, sensor_name, properties, owner=None, source=None, procedures=None, elevation=0):
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/datapoints.py:103:9: E303 too many blank lines (2)
datapoint['properties'] = properties
^
|
|||||
|
unnamed test suite
docs.source.conf
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/docs/source/conf.py:34:5: E128 continuation line under-indented for visual indent 'sphinx.ext.doctest', ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/docs/source/conf.py:35:5: E128 continuation line under-indented for visual indent 'sphinx.ext.viewcode', ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/docs/source/conf.py:36:5: E128 continuation line under-indented for visual indent 'sphinx.ext.githubpages'] ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/docs/source/conf.py:159:1: W391 blank line at end of file ^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/docs/source/conf.py:34:5: E128 continuation line under-indented for visual indent
'sphinx.ext.doctest',
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/docs/source/conf.py:35:5: E128 continuation line under-indented for visual indent
'sphinx.ext.viewcode',
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/docs/source/conf.py:36:5: E128 continuation line under-indented for visual indent
(5 more lines...)
|
|||||
|
unnamed test suite
pyclowder.geostreams.geocode_convert
|
Failing since build #1 (First build for this plan) | Default Job | < 1 sec | ||
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:6:1: E302 expected 2 blank lines, found 0 def dms2dec(dms): ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:38: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:40: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:58: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:60: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:78: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:80: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:109: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:111: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:121: E501 line too long (175 > 120 characters) dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:129: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:131: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:149: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:151: E251 unexpected spaces around keyword / parameter equals dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string()) ^ /home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:9:26: E231 missing whitespace after ',' return [float(dec[0]),float(dec[1])] ^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:6:1: E302 expected 2 blank lines, found 0
def dms2dec(dms):
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:38: E251 unexpected spaces around keyword / parameter equals
dec = list(LatLon(Latitude(degree = dms[0][0], minute = dms[0][1], second = dms[0][2]), Longitude(degree = dms[1][0], minute = dms[1][1], second = dms[1][2])).to_string())
^
/home/bamboo/bamboo-agent-home/xml-data/build-dir/CATS-PYC245-JOB1/pyclowder/geostreams/geocode_convert.py:7:40: E251 unexpected spaces around keyword / parameter equals
(38 more lines...)
|
|||||